Description
The PPT-Eagle Eddy current proximity probes are used for non-contact measurement of shaft vibration and position. The sensor is designed to ensure excellent linearity and active temperature compensation.
The built-in oscillator tuned above 750kHz ensures measurement with minimal magnetic run out effect.
The PPT-Eagle can be used either for measurement between 0.2mm and 2.2mm or 0.2mm and 4.2mm. The voltage output is directly proportional to the measured distance between the metallic
target and the sensor tip. The embedded sensor head is resistant to shock. The sealed body is resistant to oil and water on both sides of the sensor.
Built-in Modbus interface provides time based calculated values such as pk-pk, pk, mean (gap) and sensor temperature.
The sensor can be operated in two modes: digital or analogue. The digital operating mode provides the calculated values via modbus interface and the analogue operating mode
provides the analogue output for commissioning or raw signal analysis.
Optional configuration (software, cable and USB adapter) provides a method to perform configuration of the measuring range, target material, Modbus parameters, alarm thresholds, and the sampling rate.
Key Features
- Designed for long life cycles and harsh environments
- One probe for sensitivity 8mV/µm or 4mV/µm
- Frequency range : 0..2kHz
- Built-in digital Modbus interface providing pk-pk, mean, min and max, temperature
- Active temperature compensation
- Two operating modes: digital or analogue
- Optional configuration kit for setting and calibration